This partition is commonly use by a lot of programmers nor for those people who wish to partition their own personal computers. Here...
1. Select1: Create dos partition or logical dos drive
2. Select1: Create primary dos partition.
3. Select N to use the maximum available size for a primary dos partition and to make the partition active.
4. Enter the partition size for primary dos partition. The full size of the drive will be shown
5. Press enter and the primary dos partition will be created.
6. Press esc.
7. There will be warning that no partitions are set active. You need to do this in order to boot from the primary partition.
8. Select 2: Set active partition.
9. Enter 1 for the partition you want to make active.
10. Press esc to continue.
Hope you guys will find this one a useful information. Have a nice day!...c",)
1. Select1: Create dos partition or logical dos drive
2. Select1: Create primary dos partition.
3. Select N to use the maximum available size for a primary dos partition and to make the partition active.
4. Enter the partition size for primary dos partition. The full size of the drive will be shown
5. Press enter and the primary dos partition will be created.
6. Press esc.
7. There will be warning that no partitions are set active. You need to do this in order to boot from the primary partition.
8. Select 2: Set active partition.
9. Enter 1 for the partition you want to make active.
10. Press esc to continue.
Hope you guys will find this one a useful information. Have a nice day!...c",)
Posts
No Response to "Ten steps on How to partition a New HArd Disk Drive"
Post a Comment